Full Line Product Catalog

Detectable Rodders Duct Hunters™ have a copper wire in the rod to trace or map underground conduit or pipe without digging or trenching. Connecting a signal transmitter to the Duct Hunter™ ener gizes the unit with a specific frequency. When the energized Duct Hunter™ rod is pushed into underground pipe, the signal radiates outward through the soil to the surface. A signal receiver is then used to detect the frequency applied to the Duct Hunter™ by a transmitter. The entire buried utility pipe can be traced and marked continuously from above ground by one man without digging. • Trace to depths up to 10’ • Locate sewer laterals • Rigid frame and wheel construction • Rod ferrule attaches to sonde, roller guide or pulling eye • Accessory kit included • Bend Radius: 5/16” Rod 6” Bend; 7/16” Rod 9” Bend

Trace or Map Underground Pipe Before Digging

18 AWG (1mm) copper trace wire

Fiberglass strength

member

Abrasion resistant high strength polymer jacket

DUCT HUNTER™ DETECTABLE RODDERS

Attach alligator clip from standard field transmitter to Duct Hunter rod bolt. Attach the other transmitter clip to ground spike. The copper wire is energized with an electromagnetic signal detectable above ground with a hand-held signal receiver.

10

C.L. Blankenship, Inc. • 800-247-7747 • sales@clblankenship.com • www.clblankenship.com