Full Line Product Catalog

Check Valves, CA-3131 Pipe Fittings

Part Number

Details

Check Valves: These items features a poppet design with and ‘O’ ring seal for positive closure. Closing of the valve occures when the manifold pressure dops 0.5 PSIG bellow the cable pressure. This part utilizes a plastic collar, is re-usable and requires no special tools.

30 series Check Valves

30-3/8 - Air flow direction from 3/8 tube connection to 1/8″ Male NPT. 

30M-3/8 -   Air flow direct from 1/8″ Male NPT to 3/8 Tube connection. Replaces AMPFIT part # 556456-1.

This part is used in the Air Pipe system for connecting the 3/8″ tubing into an existing fitting with female 1/4″ NPT . This part utilizes a plastic collar, is re-usable and requires no special tools.  Replaces AMPFIT part # 561312-1.  

68P-6-4

Note: 68P-6-2 is similar with the exception being the 1/8″ Male NPT. Replaces AMPFIT part # 561310-1.

This part is used in the Air Pipe system specifically for connecting the 3/8″ tubing. This part utilizes a plastic collar, is re-usable and requires no special tools.  Replaces AMPFIT part # 561302-1.

62P-6

Check-Valve with air flow direction from 3/8 tube connection to 1/8″ Male NPT with 90 elbow fitting. This part utilizes a plastic collar, is re-usable and requires no special tools. Replaces AMPFIT part # 556458-1.

3090-3/8

This part is used in the Air Pipe system specifically for connecting (3)  3/8″ tubing ends or running a branch off of an existing 3/8″ tubing run. This part utilizes a plastic collar, is re-usable and requires no special tools.  Replaces AMPFIT part # 561304-1.

164P-6

Check Valve to be used as a protective device installed between the CA3131 Gas Feeder Pipe and the manifold assembly, the valve will close when pressure drops 0.2 PSIG below the manifold pressure. The check valve features high flow capacity, minimal pressure drop and “bubble-tight” shutoff. A 1/8″ NPT Hex Nipple is included

8779

This Elbow fitting is used to connect to 3/8″ poly tube ends in the CA3131 air pipe system.  Sold in packages of 10. This part utilizes a plastic collar, is re-usable and requires no special tools.  Replaces AMPFIT part # 561318-1.

170-68P-6-6

For Parts Sales and Technical Support 24-Hours Call 1-800-247-7747 Web: www.clblankenship.com