Full Line Product Catalog
Manifolds, Hi-Valves, By-Pass Valves
Part Number
Details
8622-100-1F The Hi-Valve single valve can be located on a pole or at the neck of a manhole. This block has 1 “F” pressure testing valve and 1 “B” connector attached.
8622-100-2F The Hi-Valve double valve can be located on a pole or at the neck of a manhole. This block has 2 “F” pressure testing valves and 2 “B” connectors attached.
This Hi-Valve Connecting Block features a convenient means for terminating the plastic tubing connect to each underground cable. This block has 5 “F” Pressure testing valves and 5 “B” connectors.
8622-5
The 8664 is used for constructing a by-pass across a pressure plug. It comes equiped with (2) 3/8″ tube connections and (2) F test valve points. The diaphram in the housing can be opened and closed with an flat-head screw driver.
8664
Plated Brass manifolds equipped with individual shut off valves, pressure testing valves and tubing connections for 2 cables with an additional pretture testing valve for reading manifold pressure.
8778-2
Plated Brass manifolds equipped with individual shut off valves, pressure testing valves and tubing connections for 3 cables with an additional pretture testing valve for reading manifold pressure.
8778-3
Plated Brass manifolds equipped with individual shut off valves, pressure testing valves and tubing connections for 5 cables with an additional pretture testing valve for reading manifold pressure. The inflow consists of a pre-fitted 1/8″ elbow which can be mated with the 68P-6-2 polyfitting for connection to the incoming 3/8″ tubing. As with the other CA-3131 air pipe fittings, it utilizes a plastic collar, is re useable and requires no special tools. Plated Brass manifold that comes with pre-equipped with check valves at the (5) out-flowing 3/8″ fittings. This manifold, like the others, is equipped with individual shut off valves, pressure testing valves and tubing connections for 5 cables with an additional pretture testing valve for reading manifold pressure. The inflow consists of a pre-fitted 1/8″ elbow which can be mated with the 68P-6-2 polyfitting for connection to the incoming 3/8″ tubing. As with the other CA-3131 air pipe fittings, it utilizes a plastic collar and is re-useable.
8778-5
8778-5FT
For Parts Sales and Technical Support 24-Hours Call 1-800-247-7747 Web: www.clblankenship.com
Made with FlippingBook flipbook maker