Full Line Product Catalog

Product Catalog

System Studies Incorporated

9800-3084-2

Panel, ½” Pipe Return, Two Pipes

Pipe/Power Pipe Recognizing the need for a high flow capacity air pipe in congested metropolitan wire centers, System Studies Incor porated designed a new method of pressurized air delivery and monitoring called the Power Pipe System™. This new air pipe system expands the capabilities of existing ½ inch air pipe systems while offering numerous monitoring ad vantages. The Power Pipe System is comprised of a high density, polyethylene and a variety of hardware fittings and moni toring devices. The pipe has an inside diameter of 1 inch and an outside diameter of approximately 1¼ inches. Al though only twice the diameter of ½ inch CA3131 air pipe, the Power Pipe can supply as much as six times the air flow capacity as the smaller pipe. There are numerous hardware components designed for the Power Pipe System which greatly simplify installation and provide full versatility for every installation require ment. This catalog section includes product numbers and descriptions for these important components. It also lists some of the standard ½ inch air pipe components and equipment used with the Power Pipe System. Note: System Studies no longer sells the actual pipe used in the system. Please contact us for possible vendor recom mentions.

Return Pipe Panels™ are used in the Positive Air Flow System to monitor air returning from the ca bles in the field. Each panel is equipped with

components for monitoring and regulating the flow rates of two 1/2", CA3131 return pipes. Also included for each pipe is a reverse pressure valve to test for air tightness in the pipes. Panels include a 0-95 SCFH Flow Finder and High Resolution Dual Transducer™ for each pipe.

POWER PIPE FIELD EQUIPMENT

9800-3097

Flow Finder, 0-475, Bracket, No Pipe Fittings This High Range Flow Finder™ is de signed for use in 1" air pipe systems (Power Pipe Systems). It provides ac curate flow readings up to 475 SCFH, with extended reading capabilities to 950 SCFH. This Flow Finder is sup plied with mounting bracket and valves for taking readings with Flow Gauge™.

9800-3063-YY-PP-1 Flow Finder, Assembly, 0-475 SCFH, 1" Pipe Fittings, Flow Transducer 9800-3063-YY-PP-2 Flow Finder, Assembly, 0-475 SCFH, 1" Pipe Fittings, Dual Transducer

POWER PIPE PANELS

9800-3099

Panel, Power Pipe

These “YY-PP” assemblies in clude a High Resolution Flow (“1" designation) or Dual (”2" designation) Transducer™, which is pneumatically con nected to a 0-475 SCFH Flow Finder using two 1/8" pre formed stainless steel tubes. To provide the coupling to the 1" air pipe, two 3/4" NPT male to 1" pipe connectors are provided.

The Power Pipe Panel™ is a specially designed central office source panel that ac commodates a high capac ity, 1" air pipe (Power Pipe).

The panel contains a pressure regulator to control air dryer output pressure, a 0-475 SCFH (13,450 LPH) Flow Finder™ and High Resolution Dual Transducer™ to remotely meas ure delivery pressure and flow rates, and a shutoff valve.

Panel, Power Pipe Return , One Pipe

9800-3085

The Power Pipe Return Panel™ is used to return air from the field to the central office in Positive Air Flow System™ applica tions. Each panel is equipped with compo

9800-3063-YY-NN-1 Flow Finder, Assembly, 0-475 SCFH, No Pipe Fittings, Flow Transducer 9800-3063-YY-NN-2 Flow Finder, Assembly, 0-475 SCFH, No Pipe Fittings, Dual Transducer

nents for monitoring and regulating the flow rate of one re turn Power Pipe. Also included is a reverse pressure valve to test for pipe air tightness.

The Flow Finders on the “YY-NN” high range Flow Finder Monitoring Assem blies™ are not supplied with air pipe connectors. They consist of a stainless steel mounting bracket with either a High Resolu tion Flow or Dual Trans ducer pneumatically

connected to a 0-475 SCFH Flow Finder.

A1

(188117.LHD)

For Parts Sales and Technical Support 24-Hours Call 1-800-247-7747 Web: www.clblankenship.com